Safety coordinator performance appraisal

Safety coordinator performance appraisal

You can use suggestions below to make performance appraisal for Safety coordinator. You should that the appraisal depends on appraisal method (ref 11 methods of performance appraisal), appraisal form (ref top 20 performance appraisal forms) and appraisal system.

                                                             

1. Employee Details

• Employee Name
• Review Period
• Position
• Date of joining
• Department
• Review Date
• Line Manager

 

2. Work performance of Safety coordinator

How to identify work performance of Safety coordinator?

• Setting up KRA, duties, responsibilities.

• Identify weight point of each KRA/duty/responsibility.

Using the 4-point scale below, please assess your employee performance in the following areas:

• 4 – Performance was always successful, consistent and respectable and at times clearly superior and exceeding standards.
• 3.5 – Performance was at most times clearly superior and exceeding standards.
• 3 – Performance was successful, consistent, and respectable in every regard with few exceptions.
• 2.5 – Performance at times was inconsistent and did not meet standards.
• 2 – Performance at most times was inconsistent and did not always meet standards.
• 1 – Performance was overall unsuccessful and unacceptable with regard to expectations and the requirements of the position.

Then, you can create a table with columns: No, KRAs, weight, performance score, descriptions.

 

3. Job objectives of Safety coordinator

List the objectives you set out for your staff (Safety coordinator) to achieve in the past 12 months (or the period covered by this appraisal) with the measures or standards agreed – against each comment on achievement or otherwise, with reasons where appropriate.

Score the performance against each objective (1-3 = poor, 4-6 = satisfactory, 7-9 = good, 10 = excellent):

Then you create a table with columns: No – Objectives – Measure/standard - Score - Comment

 

4. Job competencies

Discuss and agree the skills, capabilities and experience required for competence in current role, and if appropriate, for readiness to progress to the next role or roles.

Using the 4 point scale below, fill up the following table:

• 4 – Exceeds expectations
• 3.5 – Somewhat Exceeds Expectations
• 3 – Meets expectations
• 2.5 – Somewhat meets expectations
• 2 – Less than expectations
• 1.5 – Somewhat less than expectations
• 1 – Inadequately short of expectations 4

 

5. Career development of Safety coordinator

Discuss and agree (as far as is possible, given budgetary, availability and authorisation considerations) the training and development support to be given to help the appraisee meet the agreed objectives above.

 

6. Overall rating of Safety coordinator:

• Exceptional
• Strong
• Fully Competent
• Continued Development
• Poor
• New to Position

Other comments:

 

7. Signatures

Name of Manager
Designation
Signature
Date

Appraisal acceptable to Employee: Yes / No Date
Signature

Safety coordinator’s Signature
Comments, if any
New Title (if applicable)
Date

Distribution: (1) Copy to HR departmental Personnel File (2) Copy to line manager. (3) Copy to Manager / Supervisor.

Please note that, forms of performance appraisal can be peer form, self-appraisal form, sub-ordinate form, 360 degree form, MBO template, review phrases, HR dept comments…

Safety advisor performance appraisal

Safety advisor performance appraisal

You can use suggestions below to make performance appraisal for Safety advisor. You should that the appraisal depends on appraisal method (ref 11 methods of performance appraisal), appraisal form (ref top 20 performance appraisal forms) and appraisal system.

                                                             

1. Employee Details

• Employee Name
• Review Period
• Position
• Date of joining
• Department
• Review Date
• Line Manager

 

2. Work performance of Safety advisor

How to identify work performance of Safety advisor?

• Setting up KRA, duties, responsibilities.

• Identify weight point of each KRA/duty/responsibility.

Using the 4-point scale below, please assess your employee performance in the following areas:

• 4 – Performance was always successful, consistent and respectable and at times clearly superior and exceeding standards.
• 3.5 – Performance was at most times clearly superior and exceeding standards.
• 3 – Performance was successful, consistent, and respectable in every regard with few exceptions.
• 2.5 – Performance at times was inconsistent and did not meet standards.
• 2 – Performance at most times was inconsistent and did not always meet standards.
• 1 – Performance was overall unsuccessful and unacceptable with regard to expectations and the requirements of the position.

Then, you can create a table with columns: No, KRAs, weight, performance score, descriptions.

 

3. Job objectives of Safety advisor

List the objectives you set out for your staff (Safety advisor) to achieve in the past 12 months (or the period covered by this appraisal) with the measures or standards agreed – against each comment on achievement or otherwise, with reasons where appropriate.

Score the performance against each objective (1-3 = poor, 4-6 = satisfactory, 7-9 = good, 10 = excellent):

Then you create a table with columns: No – Objectives – Measure/standard - Score - Comment

 

4. Job competencies

Discuss and agree the skills, capabilities and experience required for competence in current role, and if appropriate, for readiness to progress to the next role or roles.

Using the 4 point scale below, fill up the following table:

• 4 – Exceeds expectations
• 3.5 – Somewhat Exceeds Expectations
• 3 – Meets expectations
• 2.5 – Somewhat meets expectations
• 2 – Less than expectations
• 1.5 – Somewhat less than expectations
• 1 – Inadequately short of expectations 4

 

5. Career development of Safety advisor

Discuss and agree (as far as is possible, given budgetary, availability and authorisation considerations) the training and development support to be given to help the appraisee meet the agreed objectives above.

 

6. Overall rating of Safety advisor:

• Exceptional
• Strong
• Fully Competent
• Continued Development
• Poor
• New to Position

Other comments:

 

7. Signatures

Name of Manager
Designation
Signature
Date

Appraisal acceptable to Employee: Yes / No Date
Signature

Safety advisor’s Signature
Comments, if any
New Title (if applicable)
Date

Distribution: (1) Copy to HR departmental Personnel File (2) Copy to line manager. (3) Copy to Manager / Supervisor.

Please note that, forms of performance appraisal can be peer form, self-appraisal form, sub-ordinate form, 360 degree form, MBO template, review phrases, HR dept comments…

Safety and security officer performance appraisal

Safety and security officer performance appraisal

You can use suggestions below to make performance appraisal for Safety and security officer. You should that the appraisal depends on appraisal method (ref 11 methods of performance appraisal), appraisal form (ref top 20 performance appraisal forms) and appraisal system.

                                                             

1. Employee Details

• Employee Name
• Review Period
• Position
• Date of joining
• Department
• Review Date
• Line Manager

 

2. Work performance of Safety and security officer

How to identify work performance of Safety and security officer?

• Setting up KRA, duties, responsibilities.

• Identify weight point of each KRA/duty/responsibility.

Using the 4-point scale below, please assess your employee performance in the following areas:

• 4 – Performance was always successful, consistent and respectable and at times clearly superior and exceeding standards.
• 3.5 – Performance was at most times clearly superior and exceeding standards.
• 3 – Performance was successful, consistent, and respectable in every regard with few exceptions.
• 2.5 – Performance at times was inconsistent and did not meet standards.
• 2 – Performance at most times was inconsistent and did not always meet standards.
• 1 – Performance was overall unsuccessful and unacceptable with regard to expectations and the requirements of the position.

Then, you can create a table with columns: No, KRAs, weight, performance score, descriptions.

 

3. Job objectives of Safety and security officer

List the objectives you set out for your staff (Safety and security officer) to achieve in the past 12 months (or the period covered by this appraisal) with the measures or standards agreed – against each comment on achievement or otherwise, with reasons where appropriate.

Score the performance against each objective (1-3 = poor, 4-6 = satisfactory, 7-9 = good, 10 = excellent):

Then you create a table with columns: No – Objectives – Measure/standard - Score - Comment

 

4. Job competencies

Discuss and agree the skills, capabilities and experience required for competence in current role, and if appropriate, for readiness to progress to the next role or roles.

Using the 4 point scale below, fill up the following table:

• 4 – Exceeds expectations
• 3.5 – Somewhat Exceeds Expectations
• 3 – Meets expectations
• 2.5 – Somewhat meets expectations
• 2 – Less than expectations
• 1.5 – Somewhat less than expectations
• 1 – Inadequately short of expectations 4

 

5. Career development of Safety and security officer

Discuss and agree (as far as is possible, given budgetary, availability and authorisation considerations) the training and development support to be given to help the appraisee meet the agreed objectives above.

 

6. Overall rating of Safety and security officer:

• Exceptional
• Strong
• Fully Competent
• Continued Development
• Poor
• New to Position

Other comments:

 

7. Signatures

Name of Manager
Designation
Signature
Date

Appraisal acceptable to Employee: Yes / No Date
Signature

Safety and security officer’s Signature
Comments, if any
New Title (if applicable)
Date

Distribution: (1) Copy to HR departmental Personnel File (2) Copy to line manager. (3) Copy to Manager / Supervisor.

Please note that, forms of performance appraisal can be peer form, self-appraisal form, sub-ordinate form, 360 degree form, MBO template, review phrases, HR dept comments…

Safety and health manager performance appraisal

Safety and health manager performance appraisal

You can use suggestions below to make performance appraisal for Safety and health manager. You should that the appraisal depends on appraisal method (ref 11 methods of performance appraisal), appraisal form (ref top 20 performance appraisal forms) and appraisal system.

                                                             

1. Employee Details

• Employee Name
• Review Period
• Position
• Date of joining
• Department
• Review Date
• Line Manager

 

2. Work performance of Safety and health manager

How to identify work performance of Safety and health manager?

• Setting up KRA, duties, responsibilities.

• Identify weight point of each KRA/duty/responsibility.

Using the 4-point scale below, please assess your employee performance in the following areas:

• 4 – Performance was always successful, consistent and respectable and at times clearly superior and exceeding standards.
• 3.5 – Performance was at most times clearly superior and exceeding standards.
• 3 – Performance was successful, consistent, and respectable in every regard with few exceptions.
• 2.5 – Performance at times was inconsistent and did not meet standards.
• 2 – Performance at most times was inconsistent and did not always meet standards.
• 1 – Performance was overall unsuccessful and unacceptable with regard to expectations and the requirements of the position.

Then, you can create a table with columns: No, KRAs, weight, performance score, descriptions.

 

3. Job objectives of Safety and health manager

List the objectives you set out for your staff (Safety and health manager) to achieve in the past 12 months (or the period covered by this appraisal) with the measures or standards agreed – against each comment on achievement or otherwise, with reasons where appropriate.

Score the performance against each objective (1-3 = poor, 4-6 = satisfactory, 7-9 = good, 10 = excellent):

Then you create a table with columns: No – Objectives – Measure/standard - Score - Comment

 

4. Job competencies

Discuss and agree the skills, capabilities and experience required for competence in current role, and if appropriate, for readiness to progress to the next role or roles.

Using the 4 point scale below, fill up the following table:

• 4 – Exceeds expectations
• 3.5 – Somewhat Exceeds Expectations
• 3 – Meets expectations
• 2.5 – Somewhat meets expectations
• 2 – Less than expectations
• 1.5 – Somewhat less than expectations
• 1 – Inadequately short of expectations 4

 

5. Career development of Safety and health manager

Discuss and agree (as far as is possible, given budgetary, availability and authorisation considerations) the training and development support to be given to help the appraisee meet the agreed objectives above.

 

6. Overall rating of Safety and health manager:

• Exceptional
• Strong
• Fully Competent
• Continued Development
• Poor
• New to Position

Other comments:

 

7. Signatures

Name of Manager
Designation
Signature
Date

Appraisal acceptable to Employee: Yes / No Date
Signature

Safety and health manager’s Signature
Comments, if any
New Title (if applicable)
Date

Distribution: (1) Copy to HR departmental Personnel File (2) Copy to line manager. (3) Copy to Manager / Supervisor.

Please note that, forms of performance appraisal can be peer form, self-appraisal form, sub-ordinate form, 360 degree form, MBO template, review phrases, HR dept comments…

Safety administrator performance appraisal

Safety administrator performance appraisal

You can use suggestions below to make performance appraisal for Safety administrator. You should that the appraisal depends on appraisal method (ref 11 methods of performance appraisal), appraisal form (ref top 20 performance appraisal forms) and appraisal system.

                                                             

1. Employee Details

• Employee Name
• Review Period
• Position
• Date of joining
• Department
• Review Date
• Line Manager

 

2. Work performance of Safety administrator

How to identify work performance of Safety administrator?

• Setting up KRA, duties, responsibilities.

• Identify weight point of each KRA/duty/responsibility.

Using the 4-point scale below, please assess your employee performance in the following areas:

• 4 – Performance was always successful, consistent and respectable and at times clearly superior and exceeding standards.
• 3.5 – Performance was at most times clearly superior and exceeding standards.
• 3 – Performance was successful, consistent, and respectable in every regard with few exceptions.
• 2.5 – Performance at times was inconsistent and did not meet standards.
• 2 – Performance at most times was inconsistent and did not always meet standards.
• 1 – Performance was overall unsuccessful and unacceptable with regard to expectations and the requirements of the position.

Then, you can create a table with columns: No, KRAs, weight, performance score, descriptions.

 

3. Job objectives of Safety administrator

List the objectives you set out for your staff (Safety administrator) to achieve in the past 12 months (or the period covered by this appraisal) with the measures or standards agreed – against each comment on achievement or otherwise, with reasons where appropriate.

Score the performance against each objective (1-3 = poor, 4-6 = satisfactory, 7-9 = good, 10 = excellent):

Then you create a table with columns: No – Objectives – Measure/standard - Score - Comment

 

4. Job competencies

Discuss and agree the skills, capabilities and experience required for competence in current role, and if appropriate, for readiness to progress to the next role or roles.

Using the 4 point scale below, fill up the following table:

• 4 – Exceeds expectations
• 3.5 – Somewhat Exceeds Expectations
• 3 – Meets expectations
• 2.5 – Somewhat meets expectations
• 2 – Less than expectations
• 1.5 – Somewhat less than expectations
• 1 – Inadequately short of expectations 4

 

5. Career development of Safety administrator

Discuss and agree (as far as is possible, given budgetary, availability and authorisation considerations) the training and development support to be given to help the appraisee meet the agreed objectives above.

 

6. Overall rating of Safety administrator:

• Exceptional
• Strong
• Fully Competent
• Continued Development
• Poor
• New to Position

Other comments:

 

7. Signatures

Name of Manager
Designation
Signature
Date

Appraisal acceptable to Employee: Yes / No Date
Signature

Safety administrator’s Signature
Comments, if any
New Title (if applicable)
Date

Distribution: (1) Copy to HR departmental Personnel File (2) Copy to line manager. (3) Copy to Manager / Supervisor.

Please note that, forms of performance appraisal can be peer form, self-appraisal form, sub-ordinate form, 360 degree form, MBO template, review phrases, HR dept comments…

Safety assistant performance appraisal

Safety assistant performance appraisal

You can use suggestions below to make performance appraisal for Safety assistant. You should that the appraisal depends on appraisal method (ref 11 methods of performance appraisal), appraisal form (ref top 20 performance appraisal forms) and appraisal system.

                                                             

1. Employee Details

• Employee Name
• Review Period
• Position
• Date of joining
• Department
• Review Date
• Line Manager

 

2. Work performance of Safety assistant

How to identify work performance of Safety assistant?

• Setting up KRA, duties, responsibilities.

• Identify weight point of each KRA/duty/responsibility.

Using the 4-point scale below, please assess your employee performance in the following areas:

• 4 – Performance was always successful, consistent and respectable and at times clearly superior and exceeding standards.
• 3.5 – Performance was at most times clearly superior and exceeding standards.
• 3 – Performance was successful, consistent, and respectable in every regard with few exceptions.
• 2.5 – Performance at times was inconsistent and did not meet standards.
• 2 – Performance at most times was inconsistent and did not always meet standards.
• 1 – Performance was overall unsuccessful and unacceptable with regard to expectations and the requirements of the position.

Then, you can create a table with columns: No, KRAs, weight, performance score, descriptions.

 

3. Job objectives of Safety assistant

List the objectives you set out for your staff (Safety assistant) to achieve in the past 12 months (or the period covered by this appraisal) with the measures or standards agreed – against each comment on achievement or otherwise, with reasons where appropriate.

Score the performance against each objective (1-3 = poor, 4-6 = satisfactory, 7-9 = good, 10 = excellent):

Then you create a table with columns: No – Objectives – Measure/standard - Score - Comment

 

4. Job competencies

Discuss and agree the skills, capabilities and experience required for competence in current role, and if appropriate, for readiness to progress to the next role or roles.

Using the 4 point scale below, fill up the following table:

• 4 – Exceeds expectations
• 3.5 – Somewhat Exceeds Expectations
• 3 – Meets expectations
• 2.5 – Somewhat meets expectations
• 2 – Less than expectations
• 1.5 – Somewhat less than expectations
• 1 – Inadequately short of expectations 4

 

5. Career development of Safety assistant

Discuss and agree (as far as is possible, given budgetary, availability and authorisation considerations) the training and development support to be given to help the appraisee meet the agreed objectives above.

 

6. Overall rating of Safety assistant:

• Exceptional
• Strong
• Fully Competent
• Continued Development
• Poor
• New to Position

Other comments:

 

7. Signatures

Name of Manager
Designation
Signature
Date

Appraisal acceptable to Employee: Yes / No Date
Signature

Safety assistant’s Signature
Comments, if any
New Title (if applicable)
Date

Distribution: (1) Copy to HR departmental Personnel File (2) Copy to line manager. (3) Copy to Manager / Supervisor.

Please note that, forms of performance appraisal can be peer form, self-appraisal form, sub-ordinate form, 360 degree form, MBO template, review phrases, HR dept comments…

Room service order taker performance appraisal

Room service order taker performance appraisal

You can use suggestions below to make performance appraisal for Room service order taker. You should that the appraisal depends on appraisal method (ref 11 methods of performance appraisal), appraisal form (ref top 20 performance appraisal forms) and appraisal system.

                                                             

1. Employee Details

• Employee Name
• Review Period
• Position
• Date of joining
• Department
• Review Date
• Line Manager

 

2. Work performance of Room service order taker

How to identify work performance of Room service order taker?

• Setting up KRA, duties, responsibilities.

• Identify weight point of each KRA/duty/responsibility.

Using the 4-point scale below, please assess your employee performance in the following areas:

• 4 – Performance was always successful, consistent and respectable and at times clearly superior and exceeding standards.
• 3.5 – Performance was at most times clearly superior and exceeding standards.
• 3 – Performance was successful, consistent, and respectable in every regard with few exceptions.
• 2.5 – Performance at times was inconsistent and did not meet standards.
• 2 – Performance at most times was inconsistent and did not always meet standards.
• 1 – Performance was overall unsuccessful and unacceptable with regard to expectations and the requirements of the position.

Then, you can create a table with columns: No, KRAs, weight, performance score, descriptions.

 

3. Job objectives of Room service order taker

List the objectives you set out for your staff (Room service order taker) to achieve in the past 12 months (or the period covered by this appraisal) with the measures or standards agreed – against each comment on achievement or otherwise, with reasons where appropriate.

Score the performance against each objective (1-3 = poor, 4-6 = satisfactory, 7-9 = good, 10 = excellent):

Then you create a table with columns: No – Objectives – Measure/standard - Score - Comment

 

4. Job competencies

Discuss and agree the skills, capabilities and experience required for competence in current role, and if appropriate, for readiness to progress to the next role or roles.

Using the 4 point scale below, fill up the following table:

• 4 – Exceeds expectations
• 3.5 – Somewhat Exceeds Expectations
• 3 – Meets expectations
• 2.5 – Somewhat meets expectations
• 2 – Less than expectations
• 1.5 – Somewhat less than expectations
• 1 – Inadequately short of expectations 4

 

5. Career development of Room service order taker

Discuss and agree (as far as is possible, given budgetary, availability and authorisation considerations) the training and development support to be given to help the appraisee meet the agreed objectives above.

 

6. Overall rating of Room service order taker:

• Exceptional
• Strong
• Fully Competent
• Continued Development
• Poor
• New to Position

Other comments:

 

7. Signatures

Name of Manager
Designation
Signature
Date

Appraisal acceptable to Employee: Yes / No Date
Signature

Room service order taker’s Signature
Comments, if any
New Title (if applicable)
Date

Distribution: (1) Copy to HR departmental Personnel File (2) Copy to line manager. (3) Copy to Manager / Supervisor.

Please note that, forms of performance appraisal can be peer form, self-appraisal form, sub-ordinate form, 360 degree form, MBO template, review phrases, HR dept comments…

Room service supervisor performance appraisal

Room service supervisor performance appraisal

You can use suggestions below to make performance appraisal for Room service supervisor. You should that the appraisal depends on appraisal method (ref 11 methods of performance appraisal), appraisal form (ref top 20 performance appraisal forms) and appraisal system.

                                                             

1. Employee Details

• Employee Name
• Review Period
• Position
• Date of joining
• Department
• Review Date
• Line Manager

 

2. Work performance of Room service supervisor

How to identify work performance of Room service supervisor?

• Setting up KRA, duties, responsibilities.

• Identify weight point of each KRA/duty/responsibility.

Using the 4-point scale below, please assess your employee performance in the following areas:

• 4 – Performance was always successful, consistent and respectable and at times clearly superior and exceeding standards.
• 3.5 – Performance was at most times clearly superior and exceeding standards.
• 3 – Performance was successful, consistent, and respectable in every regard with few exceptions.
• 2.5 – Performance at times was inconsistent and did not meet standards.
• 2 – Performance at most times was inconsistent and did not always meet standards.
• 1 – Performance was overall unsuccessful and unacceptable with regard to expectations and the requirements of the position.

Then, you can create a table with columns: No, KRAs, weight, performance score, descriptions.

 

3. Job objectives of Room service supervisor

List the objectives you set out for your staff (Room service supervisor) to achieve in the past 12 months (or the period covered by this appraisal) with the measures or standards agreed – against each comment on achievement or otherwise, with reasons where appropriate.

Score the performance against each objective (1-3 = poor, 4-6 = satisfactory, 7-9 = good, 10 = excellent):

Then you create a table with columns: No – Objectives – Measure/standard - Score - Comment

 

4. Job competencies

Discuss and agree the skills, capabilities and experience required for competence in current role, and if appropriate, for readiness to progress to the next role or roles.

Using the 4 point scale below, fill up the following table:

• 4 – Exceeds expectations
• 3.5 – Somewhat Exceeds Expectations
• 3 – Meets expectations
• 2.5 – Somewhat meets expectations
• 2 – Less than expectations
• 1.5 – Somewhat less than expectations
• 1 – Inadequately short of expectations 4

 

5. Career development of Room service supervisor

Discuss and agree (as far as is possible, given budgetary, availability and authorisation considerations) the training and development support to be given to help the appraisee meet the agreed objectives above.

 

6. Overall rating of Room service supervisor:

• Exceptional
• Strong
• Fully Competent
• Continued Development
• Poor
• New to Position

Other comments:

 

7. Signatures

Name of Manager
Designation
Signature
Date

Appraisal acceptable to Employee: Yes / No Date
Signature

Room service supervisor’s Signature
Comments, if any
New Title (if applicable)
Date

Distribution: (1) Copy to HR departmental Personnel File (2) Copy to line manager. (3) Copy to Manager / Supervisor.

Please note that, forms of performance appraisal can be peer form, self-appraisal form, sub-ordinate form, 360 degree form, MBO template, review phrases, HR dept comments…